-
Products
-
-
-
Contact Us
19
2020
-
10
Daily maintenance and safe use regulations for all-in-one machines
When using certain mechanical equipment, some safety regulations must be observed, especially when using heavy machinery such as a strapping machine. Here is a brief introduction to the safety regulations for using a strapping machine. Pay attention to safety when working! 1. Before using the strapping machine, please wear work gloves or other protective devices. 2. When using the machine, before starting, please check if the power switch is intact and if the brake switch is functioning normally, etc. 3. When the machine is operating, i.e., when strapping wires, do not wear gloves to avoid getting the gloves entangled in the equipment and causing equipment malfunction. 4
To ensure the integrated machine operates normally, daily checks and correct operation are essential steps. First, an equipment manual should be established for daily recording and viewing the integrated machine of operations and existing problems. When starting work, carefully check the workbench, cable guides, and main sliding surfaces. If there are obstacles, tools, impurities, etc., they must be cleaned, wiped, and oiled. Carefully check the moving mechanism of the equipment for any new pulling force, research, and if there is damage, notify the equipment personnel to check and analyze whether it is caused by a malfunction, and make a record, check the safety protection, power supply, limiters, and other equipment should be intact, check whether the distribution box is firmly closed, and whether the electrical grounding is good. Check if the equipment accessories are in good condition. The wire reel, felt clamp, wire feeding device, ceramic parts, etc. should be intact, correctly installed, and run idle to observe whether the operation is stable and whether there is any abnormal noise, etc. The above work is cumbersome, but it can effectively determine whether the equipment is intact and prevent malfunctions.
After completing the work, it should be stopped and cleaned correctly. First, place the electrical, pneumatic, and other operating switches in the non-working position, completely stop the equipment operation, cut off the power and air source, and carefully remove debris and other residues remaining on the equipment during the winding process. the integrated machine manual and record it properly.
Use the integrated machine safety regulations. When using certain mechanical equipment, some safety regulations must be observed, especially when using heavy machinery such as the integrated machine more attention should be paid. The following is a brief introduction to the safety regulations for using the integrated machine Safety regulations. Pay attention to safety during work! 1. Before using the integrated machine please wear work protection gloves or other protective devices. 2. When using, before starting to use, please check whether the power switch is intact and whether the brake switch is normal, etc. 3. When the machine is working, that is, when bundling wires, do not wear gloves to avoid getting the gloves entangled in the equipment and causing equipment failure. 4. When the mold is found to be loose, it is strictly forbidden to touch it by hand. The machine should be stopped first and checked. 5. After using the integrated machine it should be cleaned up in time, and the used tools should be returned in time.
Wire bundling machine, integrated wire bundling and finishing machine, integrated winding and embedding machine
National Sales Hotline
Business Contact Email
Company Address
No. 102, Building 10, Phase II, Tianfulai International Industrial Park, Ronggui Town, Shunde District, Foshan City, Guangdong Province