Number of views:
Double-head three-station vertical winding machine (10 axes)
Number of views:
Product serial number
Back to list
Double-head three-station vertical winding machine; two-station working one-station waiting.
This machine is mainly suitable for large motors such as three-phase motor, water pump motor, air conditioner compressor motor, refrigerator compressor motor, new energy vehicle drive motor and so on.
The machine can wind the main phase or auxiliary phase coils; the equipment can arrange the coils neatly in the hanging line cup, saving the traditional process of winding and hanging personnel; automatic jump, automatic processing of bridge line, automatic thread cutting, automatic The indexing is completed in sequence at one time; the man-machine interface can set the number of turns parameters, winding speed, sinking die height, sinking die speed, winding direction, etc.; winding tension is adjustable, with continuous winding, discontinuous winding, etc. Function; it can meet the winding of 2-pole, 4-pole, 6-pole and 8-pole motor coils.
Winding quality advantage 1: Even cable arrangement, accurate thread pushing, and neat storage of the drop-off cup; coils are not discounted, disconnected, or damaged, and the number of brine pinholes is ≤1 per 30 meters.
Winding quality advantage 2: Winding turns error: 0 turns.
Winding quality advantage 3: After winding, the winding is neat and there are no bad phenomena such as crossover, broken paint film, broken wire, and cup top running; the unique non-resistance wire passage is used, and the stretch rate is less than 1.5%.
We could not find any corresponding parameters, please add them to the properties table
Product model: LRX2/4-100
Flying fork diameter: 180-350MM
Number of working heads: 2PCS
Operating station: 4 station
Adapt to wire diameter: 0.17-0.8MM
Electromagnetic wire material： Copper wire/Aluminum wire/Copper clad aluminum wire
Bridge line processing time： 4S
Turntable transposition time： 1.5S
Applicable motor pole number： 2, 4, 6, 8
Adapt to stator stack thickness： 20MM-160MM
Maximum stator inner diameter： 150MM
Maximum speed： 2600-3000 revolutions per minute
Air source pressure： 0.6-0.8MPA
Power supply 380V three-phase four-wire system： 50/60HZ
Dimensions (L) ：2400*(W)1100*(H)2200